ALOM / ILOM Shell Configuration Commands

ALOM ILOM Shell Configuration Commands

ALOM CMT Command Summary Comparable ILOM Command password Changes the login password of the current user. set /SP/users/username password restartssh Restarts the SSH server so that new host keys generated by the ssh-keygen command are reloaded. set /SP/services/ssh restart_sshd_action=true setdate [[mmdd]HHMM |mmddHHMM[cc]yy][.SS] Sets ALOM CMT date and time. set /SP/clock datetime=value setdefaults setdefaults –a Resets all ALOM CMT configuration parameters to their default values. The –a option resets the user information to the factory default (one admin account only). set /SP reset_to_defaults=configuration set /SP reset_to_defaults=all setkeyswitch [normal|stby|diag| locked] Sets the status of the virtual keyswitch. Setting the virtual keyswitch to standby (stby) powers off the server. Before powering off the host server, ALOM CMT asks for a confirmation. set /SYS keyswitch_state=value setsc [param] [value] Sets the specified ALOM CMT parameter to the assigned value. set target property=value setupsc Runs the interactive configuration script. This script configures the ALOM CMT configuration variables. No equivalent in ILOM showplatform [–v] Displays information about the host system’s hardware configuration, and whether the hardware is providing service. The –v option displays verbose information about the displayed components. show /HOST showfru Displays information about the field-replaceable units (FRUs) in a host server. No equivalent in ILOM showusers showusers –g lines Displays a list of users currently logged in to ALOM CMT. The display for this command has a similar format to that of the UNIX command who. The –g option pauses the display after the number of lines you specify for lines. show /SP/sessions No equivalent in ILOM showhost showhost version Displays version information for host-side components. The version option displays the same information as the showhost command with no option. show /HOST showkeyswitch Displays status of virtual keyswitch. show /SYS keyswitch_state showsc [param] Displays the current non-volatile random access memory (NVRAM) configuration parameters. show target property showdate Displays the ALOM CMT date. ALOM CMT time is expressed in Coordinated Universal Time (UTC) rather than local time. The Solaris OS and ALOM CMT time are not synchronized. show /SP/clock datetime ssh-keygen –l ssh-keygen –r ssh-keygen –t {rsa|dsa} Generates Secure Shell (SSH) host keys and displays the host key fingerprint on the SC. show /SP/services/ssh/keys rsa|dsa set /SP/services/ssh generate_new_key_action=true set /SP/services/ssh generate_new_key_type=[rsa|dsa] usershow [username] Displays a list of all user accounts, permission levels, and whether passwords are assigned. show /SP/users useradd username Adds a user account to ALOM CMT. create /SP/users/username userdel username userdel –y username Deletes a user account from ALOM CMT. The –y option enables you to skip the confirmation question. delete /SP/users/username delete –script /SP/users/username userpassword [username] Sets or changes a user password. set /SP/users/username password userperm [username] [c] [u] [a] [r] Sets the permission level for a user account. set /SP/users/username role=permissions (where permissions are Administrator or Operator)

ALOM CMT Shell Log Commands

ALOM CMT Command Summary Comparable ILOM Command showlogs [–b lines|–e lines|–v] [–g lines] [-p logtype[r|p]] Displays the history of all events logged in the ALOM CMT RAM event log, or major and critical events in the persistent log. The –p option selects whether to display entries only from the RAM event log (logtype r) or the persistent event log (logtype p). show /SP/logs/event/list No equivalent in ILOM consolehistory [–b lines|–e lines|–v] [–g lines] [boot|run] Displays the host server console output buffers. No equivalent in ILOM

ALOM CMT Shell Status and Control Commands

ALOM CMT Command Summary Comparable ILOM Command showenvironment Displays the environmental status of the host server. This information includes system temperatures, power supply status, front panel LED status, hard disk drive status, fan status, voltage, and current sensor status. show –o table –level all /SYS showpower [–v] Displays power metrics for the host server. show /SP/powermgmt shownetwork [–v] Displays the current network configuration information. The –v option shows additional information about your network, including information about your DHCP server. show /SP/network console console –f Connects to the host system console. The –f option forces the console write lock from one user to another. start /SP/console No equivalent in ILOM break –c break –D Drops the host server from running the Solaris OS software into OpenBoot PROM or kmdb depending upon the mode in which the Solaris software was booted. set /HOST send_break_action=break set /HOST send_break_action=dumpcore bootmode [normal] [reset_nvram] [config=configname][bootscript =string] Controls the host server OpenBoot PROM firmware method of booting. set /HOST/bootmode property=value [where property is state, config, or script] flashupdate –s IPaddr –f pathname [–v] Downloads and updates system firmware (both host firmware and ALOM CMT firmware). For ILOM, ipaddr must be a TFTP server. If DHCP is used, ipaddr can be replaced by the name of the TFTP host. load –source tftp://ipaddr/pathname reset [–c] reset [–y][–c] reset –f reset –d reset [–d][–f] reset [–d][–n] reset [–d][–f][–n] Attempts to gracefully reset the system. If that fails, this option forcefully reset the system. Forcfully resets the system. Attempts to gracefully reset the control domain. If that fails, this option forcefully reset the control domain. Forcefully resets the control domain. When resetting the control domain, this option may automatically boot (this is the default behavior when the auto-boot option is not specified). When resetting the control domain, this option does not automatically boot and stays at the OpenBoot ok prompt. This option overrides all reboot variables and stops the control domain at the OpenBoot ok prompt after host reset. The auto-boot? option remains unchanged, thus subsequest reset commands automatically reboot host if the auto-boot? option is set to true. reset /SYS reset -script /SYS reset -f /SYS reset /HOST/domain/control reset - f /HOST/domain/control set /HOST/domain/control auto-boot=disable reset /HOST/domain/control set /HOST/domain/control auto-boot=disable reset -f /HOST/domain/control powercycle [–y] [–f] powercycle –y powercycle -f poweroff followed by poweron. The –f option forces an immediate poweroff, otherwise the command attempts a graceful shutdown. stop /SYS start /SYS stop –script /SYS start –script /SYS stop –force /SYS start –force /SYS poweroff poweroff –y poweroff –f Removes the main power from the host server. The –y option enables you to skip the confirmation question. ALOM CMT attempts to shut the server down gracefully. The –f option forces an immediate shutdown. stop /SYS stop –script /SYS stop –force /SYS poweron Applies the main power to the host server or FRU. start /SYS setlocator [on/off] Turns the Locator LED on the server on or off. set /SYS/LOCATE value=value showfaults [–v] Displays current valid system faults. show /SP/faultmgmt clearfault UUID Manually repairs system faults. set /SYS/component clear_fault_action=true showlocator Displays the current state of the Locator LED as either on or off. show /SYS/LOCATE

ALOM CMT Shell FRU Commands

ALOM CMT Command Summary Comparable ILOM Command setfru –c data The –c option enables you to store information (such as inventory codes) on all FRUs in a system. set /SYS customer_frudata=data [showfru –g lines] [–s|–d] [FRU] Displays information about the FRUs in a host server. No equivalent in ILOM removefru [–y] [FRU] Prepares a FRU (for example, a power supply) for removal. The –y option enables you to skip the confirmation question. set /SYS/PS0 prepare_to_remove_action=true

ALOM CMT Shell Automatic System Recovery (ASR) Commands

ALOM CMT Command Summary Comparable ILOM Command enablecomponent asr-key Removes a component from the asr-db blacklist. set /SYS/component component_state=enabled disablecomponent asr-key Adds a component to the asr-db blacklist. set /SYS/component component_state=disabled showcomponent asr-key Displays system components and their test status (ASR state). show /SYS/component component_state clearasrdb Removes all entries from the asr-db blacklist. No equivalent in ILOM

ALOM CMT Shell Miscellaneous Commands

ALOM CMT Command	Summary	Comparable ILOM Command
help [command]	Displays a list of all ALOM CMT commands with their syntax and a brief description of how each command works. Specifying a command name as an option enables you to view the help for that command.	help
resetsc resetsc –y	Reboots ALOM CMT. The –y option enables you to skip the confirmation question.	reset /SP reset –script /SP
userclimode	Sets the type of shell to shelltype, where shelltype is default or alom.	set /SP/users/username cli_mode=shelltype
logout	Logs out from an ALOM CMT shell session.	exit